Comparison

Sizzix Big Shot vs Sidekick: Which to Buy? (November 2026)

Updated on · By the The Dies Have It team

Choose the Big Shot for wide dies and thick materials, and the Sidekick for small dies and projects away from home. In this Sizzix Big Shot vs Sidekick comparison, the winner for most crafters is the Big Shot because its 6-inch opening handles far more dies and materials.

On this page (9 sections)
  1. Big Shot vs Sidekick: the quick verdict
  2. The two machines side by side
  3. Opening size: which dies fit each machine?
  4. Materials: what each machine can cut
  5. Setup and space: desk machine or craft bag?
  6. Plates, pads and running costs
  7. Who should buy the Big Shot?
  8. Who should buy the Sidekick?
  9. The verdict: which one should you buy?

Choose the Big Shot for wide dies and thick materials, and the Sidekick for small dies and projects away from home. In this Sizzix Big Shot vs Sidekick comparison, the winner for most crafters is the Big Shot because its 6-inch opening handles far more dies and materials.

Both are manual roller machines from Sizzix. The Big Shot is the full-size workhorse that stays on the desk.

The Sidekick is the small portable model that slips into a craft bag.

The choice is less about which machine is better and more about the dies you own and where you cut. Here is how they compare on size, materials, setup and cost of ownership.

Sizzix 660200 Big Shot Manual DieBest overall

Sizzix 660200 Big Shot Manual Die

9.6/10Our score

See it on Amazon

Sizzix Sidekick Starter KitBest for travel and small dies

Sizzix Sidekick Starter Kit

7.9/10Our score

See it on Amazon

Big Shot vs Sidekick: the quick verdict

The Big Shot is the better buy for most people, and the Sidekick is the better buy for small dies and travel. The Big Shot opens to 6 inches wide and takes nearly the whole Sizzix library.

The Sidekick opens to 2.5 inches and takes only small dies.

That opening size decides almost everything else. Wider dies need the Big Shot.

Small Thinlits and Framelits fit either machine. If you mainly make cards with small shapes, the Sidekick does the job in far less space.

A crafter with one desk and a growing die collection should start with the Big Shot. A crafter who travels, teaches or shares a table should add a Sidekick.

One detail settles a lot of first purchases: the Big Shot kit arrives ready to run a die. It ships with 1 pair of Standard Cutting Pads and 1 Multipurpose Platform, plus a Thin Die Adapter.

The Sidekick kit takes a different route and bundles dies and stamps instead. Neither box is a full die collection, so plan on buying dies whichever way you go.

The two machines side by side

They share the same manual roller design but differ in opening width, weight and what comes in the box. The table shows the numbers that matter when you choose.

FeatureBig Shot 660200Sidekick Starter Kit
Opening width6 in2.5 in
Dimensions14.25 x 12.36 x 6.61 in7.75 x 4.75 x 3.5 in
Weight7.50 lb2 lb
Die compatibilityFull Sizzix library except Plus and Pro diesThinlits, Framelits and folders up to 2.5 in wide
MaterialsPaper, tissue, cardstock, felt, cork, balsa woodLightweight cardstock to paper
In the boxMachine, Cutting Pads, Multipurpose Platform, Thin Die AdapterMachine, Framelits dies, Thinlits dies, embossing folders, stamps
Steady on the tableFreestandingVacuum seal base

The Big Shot weighs nearly four times as much as the Sidekick. That weight helps keep it steady during a long cutting session.

It also means the machine lives in one place rather than moving between rooms.

The Sidekick weighs about 2 lb and stands under 5 inches tall. Its vacuum seal base holds it to a smooth work surface so it doesn't slide while you turn the handle.

The footprint numbers are worth reading twice. The Big Shot's 14.25 by 12.36 inch base needs a clear, sturdy surface, and its 6.61 inch height leaves room for the handle to swing.

The Sidekick's 7.75 by 4.75 inch base fits on a corner of a table or a shelf, and its 3.5 inch height lets it slide into a drawer or tote.

Opening size: which dies fit each machine?

The 6-inch opening is the Big Shot's main advantage, because it takes almost every Sizzix die. The Sidekick's 2.5-inch opening limits it to small Thinlits, Framelits and embossing folders.

The Big Shot's A5-sized opening takes Bigz, Thinlits and Framelits dies plus embossing folders. It does not take Plus or Pro dies, which need the larger Big Shot Plus or Pro machines.

Our Sizzix Big Shot review covers the full die library in more detail.

The Sidekick takes Thinlits and Framelits dies and embossing folders up to 2.5 inches wide. Small and Medium Sizzlits and Sizzlits Decorative Strips also work in it.

A Bigz die or a wide background die simply won't fit through the opening.

If your die stash includes large alphabet sets, big background plates or wide embossing folders, the Big Shot is the only one of the two that will run them. If your dies are mostly small shapes, either machine works.

Where the opening size bites

The gap matters most on card fronts. A 6-inch opening lets you run a die that covers most of a card panel in one pass.

A 2.5-inch opening means cutting several smaller pieces and assembling them.

The same applies to embossing. Wide folders that texture a full card front fit the Big Shot.

The Sidekick handles only folders up to 2.5 inches wide, so background texture becomes a patchwork.

Check the width of your most-used dies before you choose. Measure the die itself, not the shape it cuts, because the die plate is what has to pass through the machine.

Die type matters as much as die width. Steel-rule Bigz dies fit the Big Shot's opening and library, while the Sidekick is built for the thin, detailed dies.

If your stash mixes the two kinds, the Big Shot covers more of it.

Materials: what each machine can cut

The Big Shot cuts and embosses far more materials, from paper and cardstock to felt, cork and balsa wood. The Sidekick is limited to lightweight cardstock and paper.

Sizzix lists the Big Shot as able to cut and emboss paper, tissue, cardstock, felt, cork and balsa wood. That range covers cardmaking, scrapbooking, quilting, appliqué and small wood or felt embellishments.

The Sidekick cuts a single sheet of lightweight cardstock to paper. It's built for thin, detailed dies, and its smaller rollers don't apply the pressure a thick material needs.

That difference decides a lot of projects. Felt ornaments, cork coasters and balsa shapes need the Big Shot.

Layered paper cards and small die-cut accents work fine on the Sidekick.

If you want to try fabric or thicker materials later, buy the Big Shot now rather than adding a second machine. The Sidekick won't grow with you in that direction.

The material lists are also a clue about die pressure. Sizzix describes die cutting as the die revealing the design while the machine only applies the pressure.

A thicker stack of felt or cork needs more of that pressure, and the Big Shot's larger rollers supply it. The Sidekick is built around a single sheet of lightweight cardstock.

Setup and space: desk machine or craft bag?

The Big Shot needs a permanent spot on a sturdy desk, while the Sidekick fits in a drawer or a tote. Measure your workspace before you buy either one.

The Big Shot takes up about 14.25 by 12.36 inches of table and stands 6.61 inches tall. You also need clear space in front for the platform to feed through as you turn the handle.

Its 7.50 lb weight and size suit a dedicated craft room or a fixed corner of a table. Plan where the machine lives and keep its plates nearby so you aren't moving it for every project.

The Sidekick measures about 7.75 by 4.75 by 3.5 inches and weighs 2 lb. It fits on a crowded desk, a kitchen table or in a craft bag.

The vacuum seal base lets you press it onto a smooth surface so it stays put while you cut.

A small apartment, a shared dining table or a regular crop night all favor the Sidekick. A dedicated craft room with a permanent desk favors the Big Shot.

What's in each box

The Big Shot arrives with 1 pair of Standard Cutting Pads and 1 Multipurpose Platform, plus a Thin Die Adapter. You can run your first dies without buying extra plates.

Our guide to Sizzix Big Shot plates explains which pads each die type needs.

The Sidekick Starter Kit is a bundle rather than just a machine. It includes the Sidekick, six Framelits dies, two Thinlits dies, two small Textured Impressions embossing folders and seven stamps.

That makes it a low-friction first purchase for a beginner.

Neither kit is a complete die library. The Big Shot gives you the machine and the plates, and you add dies.

The Sidekick gives you the machine plus a starter set of small dies and stamps.

Moving the Sidekick between surfaces

The vacuum seal is the Sidekick's answer to the Big Shot's weight. A lever on the base grips smooth surfaces so the machine stays put while you turn the handle.

That makes a borrowed table or a hotel desk usable without clamps.

The catch is the surface itself. The seal needs something smooth to grip, so a textured table or a lap won't hold it.

Check the table before you count on the seal.

Plates, pads and running costs

The Big Shot uses Standard Cutting Pads and a Multipurpose Platform, while the Sidekick uses its own smaller pads. Replacement pads are the main ongoing cost for either machine.

Cutting pads are consumable items. They mark, bow and eventually need replacing with heavy use.

Budget for a spare set of pads for whichever machine you choose. Sizzix notes that pads are not covered by its warranty and that bowing and marking are normal through use.

Do not mix them up. The Big Shot Plus Cutting Pad fits the Big Shot Plus and Big Shot Pro only.

It doesn't fit the standard Big Shot or the Sidekick. Our Big Shot vs Big Shot Plus comparison covers the plate differences between those two machines.

For the Sidekick, the smaller pads match its 2.5-inch opening. Sizzix also sells a Sidekick Sticky Grid set of reusable adhesive sheets with grid lines.

They hold small Thinlits and Framelits dies in place so you can position a cut precisely. The sheets work with the Sidekick and the Big Shot family.

Sticky grids are optional, not required. They help most on tiny dies and repeated cuts where alignment matters.

For everyday cardmaking with larger dies, the standard pads do the job. The set is five sheets at 2.5 by 4.75 inches each, with a temporary adhesive that can be reused on either side.

Which machine is cheaper to run?

The Big Shot's standard pads are larger, so a pair covers more surface area per replacement. The Sidekick's pads are smaller and match its narrow opening.

Either way, pads are a small ongoing cost compared with dies. The bigger budget question is which dies you'll buy.

A Big Shot lets you buy from the full Sizzix library. A Sidekick locks you into small dies only.

Who should buy the Big Shot?

Buy the Big Shot if you want one machine that handles almost every die and material. It's the right first machine for cardmakers, scrapbookers and quilters who work at a fixed desk.

The 6-inch opening, the full material range and the included platform make it the more capable of the two. It's also the better long-term buy, because your die collection can grow without outgrowing the machine.

Choose the Big Shot if you cut felt, cork or balsa wood, use wide embossing folders, or plan to buy large background and alphabet dies. The one limit is Plus and Pro dies, which need a bigger machine.

Our Sizzix Big Shot Switch Plus machine reviews cover the newer powered models if you want help turning the handle.

Who should buy the Sidekick?

Buy the Sidekick if you only use small dies, craft away from home or have very little space. It's the portable option, and the starter kit makes it a gentle way into die cutting.

It suits cardmakers who build scenes from small Thinlits and Framelits shapes. It also suits crafters who take supplies to classes, crops or a friend's house, since it weighs 2 lb and packs into a bag.

The starter kit adds dies, folders and stamps, so a beginner can start cutting right away. That's a real advantage for someone testing whether they enjoy die cutting before investing in a full-size machine.

The bundle also works with other brands' thin dies and embossing folders up to 2.5 inches, so the kit's dies aren't the only ones you can run.

Skip the Sidekick if your wishlist includes wide dies or thicker materials. It can't grow in that direction, so the Big Shot is the better buy even for a beginner.

The verdict: which one should you buy?

For most people the Big Shot is the better buy, and the Sidekick is the better second machine or travel companion. The Sizzix Big Shot vs Sidekick question comes down to die width and workspace.

Pick the Big Shot if you want one machine for cards, scrapbooks, felt, cork and wide embossing folders. Its 6-inch opening and included platform make it the more versatile buy.

Pick the Sidekick if your dies are small and you cut away from home or on a small table.

If you can only buy one and your space allows it, choose the Big Shot. If space or travel is the deciding factor and your dies fit 2.5 inches, the Sidekick Starter Kit does the job at a lower weight and footprint.

Either way, check your die widths first. That single number tells you which machine belongs on your desk.

Frequently asked questions

Can the Sidekick use Big Shot dies?

The Sidekick only takes Thinlits, Framelits and embossing folders up to 2.5 inches wide. Bigz dies and anything wider than that opening need a Big Shot or another large machine.

Does the Big Shot come with everything you need to start?

Yes. The Big Shot arrives with 1 pair of Standard Cutting Pads and 1 Multipurpose Platform, so you can run your first dies without buying extra plates.

How much space does each machine take up?

The Big Shot measures about 14.25 by 12.36 by 6.61 inches and weighs 7.50 lb. The Sidekick measures about 7.75 by 4.75 by 3.5 inches and weighs 2 lb.

Is the Sidekick good for cardmaking?

The Sidekick is a good fit for cards built from small Thinlits and Framelits shapes and embossing folders up to 2.5 inches wide. For large background dies or wide embossing folders, choose the Big Shot.

Do both machines need the same cutting pads?

No. The Big Shot uses Standard Cutting Pads sized for its 6-inch opening.

The Sidekick uses its own smaller pads, and the Big Shot Plus pads sold separately fit neither machine.