Cricut Machine Types Explained
The types of Cricut machines fall into three families: Joy (compact, 4.5 in), Explore (12 in all-rounder) and Maker (12 in with the widest material and tool support). Pick the smallest one that handles your main material and project size.
On this page (11 sections)
- What are the main types of Cricut machines?
- Which Cricut type handles the materials you use?
- How do Cricut tools and accessories change with machine type?
- Which Cricut type fits your project size?
- Which Cricut type suits apparel and T-shirt making?
- How do these machines differ in size and portability?
- What does each Cricut type cost in materials and supplies?
- How much does the design software differ between types?
- Which type should a beginner buy first?
- What do the Explore 5 and Maker 4 add over the Joy 2?
- Which types of Cricut machines fit your craft?
The types of Cricut machines fall into three families: Joy (compact, 4.5 in), Explore (12 in all-rounder) and Maker (12 in with the widest material and tool support). Pick the smallest one that handles your main material and project size.
That single rule settles most buying decisions. The rest of this guide works through the differences so you can match a machine to the things you actually want to make.
What are the main types of Cricut machines?
Cricut sells three lines: Joy, Explore and Maker, each aimed at a different scale of project. The Joy is small and portable, the Explore is the mainstream 12 in cutter, and the Maker is the top tier with the broadest material list and tool set.
The table below lines up the current generation models in this guide on the facts that change a purchase.
| Machine | Cutting width | Materials | Position |
|---|---|---|---|
| Cricut Joy 2 | 4.5 in (11.4 cm) | 75+ | Compact and portable |
| Cricut Explore 5 | 12 in (30.5 cm) | 100+ | Everyday 12 in all-rounder |
| Cricut Maker 4 | 12 in (30.5 cm) | 300+ | Widest materials and tools |
Cricut Joy 2: the compact type
The Joy 2 is Cricut's ultra-compact line. Its 4.5 in (11.4 cm) cutting width suits small everyday projects like cards, labels and simple decals rather than large banners.
Cricut Explore 5: the 12 inch all-rounder
The Explore 5 is the newest generation of the 12 in Explore family. It keeps the same dependable 12 in (30.5 cm) cutting performance while being 30% more compact than previous models.
Cricut Maker 4: the widest material type
The Maker 4 is Cricut's top-tier smart cutting machine. It handles the most materials of the three, with a material list that runs from leather and wood to vinyl and iron-on.
The key idea is that the families differ in width, material range and tools, not just price. A buyer who needs 12 in banners will outgrow the Joy quickly, while someone making gift tags rarely needs the Maker's tool range.
Narrow your search by your largest planned project, not by the longest feature list. The maker's own positioning of each line backs up that split.
If you also want to compare against rival brands, our craft cutting machine guide covers the wider field.
Decide your width first, then your material list, and only then compare models.
Which Cricut type handles the materials you use?
Match the machine's material list to what you cut most, not to every material you might try once. The Explore 5 covers 100+ popular materials and the Maker 4 covers 300+, while the Joy 2 works with 75+.
Cricut calls out vinyl, iron-on, cardstock and printable materials as shared ground across the range. The gap opens up when you move into leather, wood, foam and other thicker stock.
That means the material question matters most for hobbyists who cut fabric or thick stock. For sticker, label and T-shirt makers, the Joy 2's 75+ materials already cover the everyday list.
Check the specific material against the machine's compatible list before you commit. The thickness and backing of a given sheet matter as much as its name.
If you plan to cut vinyl decals on an Explore 5, the bundle's Smart Vinyl gives you a first project. For the Maker 4, the materials sampler includes Smart Vinyl, matless vinyl, Smart Iron-On, matless heat transfer vinyl and cardstock.
Pick by your two or three most-used materials, and let the wider list be a bonus.
How do Cricut tools and accessories change with machine type?
The tool count is the second big split after width. The Explore 5 works with six tools, while the Maker 4 supports a longer tool set that includes engraving, debossing and perforating alongside cutting.
The Explore 5 cuts, writes, draws, foils and scores. It also takes a Deep Cutting Tool, sold separately, for thicker materials like foam and rubber.
The Maker 4 goes further. Cricut says it not only cuts but also draws, foils, scores, engraves, debosses and perforates.
The Joy 2 stays in the same basic lane as the Explore: it writes, draws, foils, scores and cuts intricate designs. It has the smallest tool set of the three.
Snap-in pen holders and blade changes
The Explore 5 has a new hassle-free snap-in pen holder, so swapping a pen or foil tip takes seconds. All three machines take a pre-installed cutting blade, either with a metal housing or the newer Cutting Tool design.
Tool support is where the Maker 4 earns its price for leatherworkers, woodworkers and engravers. For paper crafters and T-shirt makers, the Explore 5's six tools cover the usual jobs.
Choose the Maker type only when a specific tool you need is missing from the Explore's six.
Which Cricut type fits your project size?
Project size is the clearest divider. The Joy 2's 4.5 in (11.4 cm) width limits you to small items, while the Explore 5 and Maker 4 both cut up to 12 in (30.5 cm) across.
A 12 in width covers full-size T-shirts, banners, large decals and standard cardstock mats. The Joy 2's smaller mat suits cards, labels, small decals and quick gifts.
The Joy 2's active surface area is 4.5 x 6.5 inches. The Explore 5 lists 72 sq in of active surface area, and the Maker 4 lists 270.25 sq in.
Cricut also points out that the Explore 5 can "make in multiples", which matters if you cut repeated shapes like invitation pieces or sticker sheets.
If your projects are mostly shirts and wall decals, the Explore 5's width is the floor you need. For a desk-side label maker or a card crafter with limited space, the Joy 2's footprint wins.
Size up to 12 in if any regular project needs full-width material.
Which Cricut type suits apparel and T-shirt making?
The Explore 5 is the strongest apparel type among the three, because its 12 in width fits standard iron-on sheets and shirts. The Joy 2 is too narrow for most full-size shirt designs, while the Maker 4 adds capability you rarely need for heat transfer vinyl.
All three machines cut iron-on, so the difference is really width and tool depth. A 12 in mat lets you cut a full front-panel design in one pass.
The Essential Bundles for the Explore 5 and Joy 2 both include Smart Iron-On. The Maker 4 bundle includes Smart Iron-On and matless heat transfer vinyl in its sampler.
Full-color apparel is possible too. You print a design on a home inkjet printer, then the machine recognizes and cuts around the printed image.
That feature is shared across the three lines.
For shirts specifically, the width and the iron-on support matter more than engraving tools. Our roundup of the best Cricut for T-shirts compares options for that job directly.
If you also cut leather patches or wood tags for a shirt line, the Maker 4's material range starts to earn its place. For cotton tees and heat transfer vinyl only, the Explore 5 is the pick.
Buy the 12 in Explore for shirts; step up to the Maker only if your apparel uses leather or wood.
How do these machines differ in size and portability?
The Joy 2 is the only truly portable type here. It weighs just over 2 lbs (0.91 kg), so it stores in a drawer or cupboard and travels easily.
The Explore 5 is 30% more compact than previous Explore models but still a benchtop machine. The Maker 4 is larger still: its dimensions are 7.1 in deep, 22.1 in wide and 6.2 in high.
Portability matters for crafters who share a table with other household uses. The Joy 2's small footprint lets you set up and pack away in minutes.
The trade-off is material width. A portable machine limits you to 4.5 in cuts, so you give up banners, large decals and full shirt panels.
For a small apartment, a kitchen table that clears for meals, or a craft bag for club nights, the Joy 2 is the practical type. For a dedicated craft room, the Explore 5 or Maker 4 fit comfortably on a desk.
Pick the Joy type when storage space is tight; pick a 12 in type when you have a permanent spot.
What does each Cricut type cost in materials and supplies?
Think about the supply cost per project, not just the machine. All three bundles here include starter materials, so the first projects are covered and you can judge the running cost later.
The Explore 5 Essential Bundle includes supplies for up to 65 projects, plus 25 bonus images and 1 font. The Joy 2 bundle covers up to 35 projects with the same bonus image count.
The Maker 4 bundle includes a materials sampler and 30 bonus images.
Cricut's math uses an average project size of 4 in x 6 in (10.2 cm x 15.2 cm) for the Explore 5 figure. Your own projects will vary, so treat those counts as a rough guide.
The bigger variable is the material itself. Smart Vinyl and cardstock are cheaper per project than leather or wood.
That is another reason the Maker type costs more to run: its materials are the expensive end of the range.
A subscription to Cricut Access adds a growing image library for a monthly or annual fee. It is optional and not needed to start.
Budget for materials first; the bundle only covers your first few weeks of cutting.
How much does the design software differ between types?
The software is the same across all three types. Design Space is Cricut's free app for mobile and desktop, and each machine connects to it over Bluetooth.
The free library includes 3,000+ images, 100+ fonts and 1,000+ projects. Each bundle here adds bonus images on top.
A Cricut Access subscription opens a larger library, with the Maker 4 listing 1.5 million+ images, 1,000+ fonts and 100,000+ projects behind that paid tier.
Beginners get step-by-step design flows, customizable templates and AI image generation in the app. The experience is the same whether you own a Joy 2 or a Maker 4, so the software is not a reason to choose one type over another.
The machine type only changes what the software can send to it. A design wider than 4.5 in will not fit the Joy 2's mat, and a leather project needs the Maker 4's tool support.
Judge the software once; judge the hardware type by your projects.
Which type should a beginner buy first?
The Explore 5 Essential is the safest first Cricut for most beginners. It gives you the full 12 in width and 100+ materials without the Maker 4's deeper tool range, so it leaves room to grow.
A beginner's first projects are usually decals, labels, cards and a T-shirt or two. The Explore 5 covers all of those in one bundle with materials included for up to 65 projects.
The Joy 2 is the better first machine for a crafter with very little space or a narrow interest in cards and labels. It is cheaper to run and easy to store, but you will hit its width limit if you later want shirts or banners.
The Maker 4 makes sense as a first machine only when you already know you want to cut leather, wood or engrave metal. Its material range and tool set are the reason to start there.

A 12 in Explore with 100+ materials, six tools and supplies for up to 65 projects, the balanced first machine for most crafters.
See it on AmazonOur how to choose the right Cricut machine walkthrough goes deeper on matching a model to your plans. If you are still sorting electronic cutters from manual presses, start with what is a die cutting machine.
Buy the Explore type first unless space or a specific craft pushes you to the Joy or Maker.
What do the Explore 5 and Maker 4 add over the Joy 2?
The jump from Joy 2 to Explore 5 is width; the jump from Explore 5 to Maker 4 is materials and tools. Each step adds capability in a specific direction.
The Joy 2 is a 4.5 in machine with 75+ materials and a small tool set. The Explore 5 doubles the width to 12 in, raises the material list to 100+ and adds foiling and scoring alongside six tools.
The Maker 4 keeps the 12 in width and pushes materials to 300+. It adds engraving, debossing and perforating, and its bundle includes a materials sampler with matless vinyl and matless heat transfer vinyl.

A 4.5 in ultra-compact that weighs just over 2 lbs and handles cards, labels and simple decals in any small space.
See it on Amazon
A 12 in machine with 300+ materials and the widest tool set, built for leather, wood and engraving work.
See it on AmazonThe practical way to read the ladder is by your end goal. Cards and labels sit at the Joy 2.
Shirts, decals and paper craft sit at the Explore 5. Leather, wood and mixed-material projects sit at the Maker 4.
Step up only when your projects need the next type's width or tools.
Which types of Cricut machines fit your craft?
Buy the type that matches your main craft and your largest regular project. For most people that is the Explore 5 Essential, which balances 12 in width, 100+ materials and six tools in one bundle.
Here is the firm rule by buyer:
- Pick the Cricut Joy 2 Essential if you make cards, labels and small decals and have limited storage space.
- Pick the Cricut Explore 5 Essential if you want shirts, banners and everyday vinyl craft at full 12 in width.
- Pick the Cricut Maker 4 if your projects include leather, wood, engraving or a wide mix of thick materials.
The types of Cricut machines are not ranked best to worst; they are sized to different jobs. Start from the material and width you use most, then choose the family that covers them without paying for tools you will not touch.
Our craft cutting machine comparison puts Cricut next to other cutter types if you are still deciding on the category. For apparel buyers, the best Cricut for T-shirts roundup narrows the shirt-friendly models.
One last check before you buy: confirm the bundle's included materials match the craft you plan to start with. A Maker 4 buyer who only cuts vinyl is paying for tools they may never use, while a Joy 2 buyer who wants shirts will run into the width limit fast.
Pick the smallest Cricut type that covers your main material and your largest project, and let the Explore 5 carry most buyers.
Frequently asked questions
Is a Cricut the same as a die cutting machine?
No. A Cricut is an electronic cutting machine that reads digital designs and moves a blade or tool along the design path.
A traditional die cutting machine presses a metal die shape into paper or cardstock.
Our explainer on what a die cutting machine is covers the manual kind.
Can I use Cricut machines without a subscription?
Yes. Design Space is free to use and each bundle here includes a starter library plus bonus images.
A Cricut Access subscription only adds to the library, so you can skip it at first.
How wide a material can each Cricut type cut?
Cricut Joy 2 cuts up to 4.5 in (11.4 cm) wide. Explore 5 and Maker 4 both cut up to 12 in (30.5 cm), so the difference between those two is material support and tools, not width.
Do these Cricut bundles include materials to start with?
Yes. Each Essential Bundle here includes supplies such as Smart Vinyl, Smart Iron-On and cardstock.
The Explore 5 bundle is enough for up to 65 projects and the Joy 2 bundle for up to 35, while the Maker 4 bundle comes with a materials sampler.
About this guide: Our look at types of Cricut machines draws on maker specs, materials and what owners report. See how we research.



